+86-0574-88106851 sales@relong.cn
Relong Auto-parts Co.,ltd
Relong Auto-parts Banner

Brief Introduction of Die Casting Parts

2018.09.07

Die casting parts are a kind of pressure casting part, it is produced through the process as follows: Pour the metal (such as copper, zinc, aluminum, aluminum alloy, etc.) that has been heated into liquid into the feeding inlet of the die casting machine. The die casting machine has been equipped with the casting moulds. Through the pressure casting of the die casting machine, the copper, zinc, aluminum or aluminum alloy parts with specific shapes and sizes are cast. These products are usually called die casting parts. The die casting parts have different names on different occasions, there are die casting parts, pressure castings, die castings, die casting aluminum, die casting zinc, die casting copper, copper castings, zinc castings, aluminum castings, aluminum alloy castings, aluminum alloy die casting parts, etc.

Die casting parts


Characteristic of Die casting parts

Because the metal copper, zinc, aluminum and aluminum alloys have good fluidity and plasticity, and the process of casting is carried out in the pressure die casting machine, the aluminum die casting can be given a variety of complex shapes, high precision as well as good finish, thus greatly reducing the amount of mechanical processing and the casting allowance of copper, zinc, aluminum and aluminum alloy, which not only saves electricity and metal materials, but also greatly saves labor costs. With the characteristics of excellent thermal conductivity, small specific gravity and high machinability, copper, zinc, aluminum and aluminum alloy castings are widely used in the automobile manufacturing industry.
Related News
  • Function and Selection of Automotive Rubber Bellows

    Function and Selection of Automotive Rubber Bellows

    August 6, 2018Background:With the emerging and rising of new energy vehicles, a good new energy vehicle cannot be separated from a set of good circuits, and the quality of the circuit depends largely on the quality...view
  • Current Situation And Development Trend of Auto Rubber Parts

    Current Situation And Development Trend of Auto Rubber Parts

    September 3, 2018The rapid development of China's automobile industry has promoted the development of other related industries, especially the rubber industry. Over the past few years, auto rubber parts have developed...view
  • Types of Automotive Rubber Gaskets

    Types of Automotive Rubber Gaskets

    September 3, 20181. NBR nitrile rubber sealIt is suitable for use in petroleum-based hydraulic oil, glycol-based hydraulic oil, diester-based lubricating oil, gasoline, water, silicone grease, silicone oil and other m...view
  • Automotive Bellows

    Automotive Bellows

    September 3, 2018The automotive bellows are tubular elastic sensing components joined by foldable crepe sheets in the direction of folding and contracting. Its open end is fixed, the sealed end is free, and the auxili...view
  • Small Rubber Buffers for Automobiles

    Small Rubber Buffers for Automobiles

    August 6, 2018With the development of society and economy, the transformation of domestic and foreign cars is quite frequent, and the automobile industry is facing a period of rapid change. The development is chara...view
  • Are You Familiar With EPDM Rubber Materials?

    Are You Familiar With EPDM Rubber Materials?

    April 13, 2018I'm sure you're not strange with EPDM of silicone rubber products which is widely used in automotive rubber parts. This rubber material has deeply penetrated into all aspects of our lives. But do you ...view
  • TEL:+86-0574-88106851
  • FAX:+86-0574-88106851
  • EMAIL:sales@relong.cn
  • ADDRESS:11/F, South Building, No. 1299, East Yinxian Avenue, Ningbo, China