The basic procedures of rubber seals manufacturers are mixing rubber processing, cord fabric and canvas processing, rubber tube forming, vulcanization and so on. For different structures and different skeletons of steam hoses, their skeleton layer processing methods and sandblasting hose molding equipments are different.
Because the rubber hose does not contain the skeleton layer, it is only necessary to use the extruder to press out the rubber forming tube; the steam hose needs to use the rubber coating on the inner rubber layer, and the rubber tube must be wrapped around the metal screw first, and wovening and winding hose need to use a special woven knitting machine or winding machine; the knitted rubber pipe requires a knitting machine.
1. characteristics: the rubber layer has good heat resistance, and the burst pressure of the hose should be no less than 10 times of the working pressure.
2. usage: it is suitable for transferring saturated steam or superheated water of no more than 150 degrees.
Armored cloth-inserted steam hose:
1. usage: it is suitable for transferring saturated steam or superheated water of no more than 150 degrees.
2. characteristics: 1. The outer surface of the rubber hose is wound with galvanized metal helix, which can effectively increase the strength of the pipe and improve the bearing capacity. 2. It is applicable to complex working conditions and occasions with high safety demands.
The auto rubber seals
are mainly used for automobile intake pipe, dustproof rubber sleeve, automobile interior rubber parts, rubber damping parts, rubber buffer parts, injection molding parts, O-ring, automobile oil seal, automobile seal, ster seal, Y-ring, combination pad, automobile special-shaped part and SF6 switch lamp.