2020.03.30
1. Multi-axis control linkage: Generally, the three-axis linkage is usually used most, but the machining center of four-axis, five-axis, seven-axis or even more linkage axes can be achieved by some adjustments. 2. Parallel machine tools: Common machining centers have a relatively fixed function. They can be combined with turning centers, or vertical and horizontal machining centers, which can increase the machining range and processing capacity of the machining center. 3. Tool damage warning: Precision CNC Machined Parts use some technical detection methods, you can find the wear and tear of the tool in time, and alarm, so that you can replace the tool in time to ensure the processing quality of the parts. 4. Tool life management: Multiple tools that work at the same time and multiple blades on the same tool can be managed in a unified manner to improve production efficiency. 5. Machine tool overload power-off protection: According to the load of the production process, the maximum load level is set. When the load reaches the set value, the machine tool can realize automatic power-off and shutdown to protect the machine tool.
September 3, 2018The rapid development of China's automotive industry is promoting the related supporting industries, especially the rubber industry. Over the years, automotive rubber parts have developed into a uniqu...
view
September 3, 2018Anti-vibration productIt is mainly installed in the engine, car body, air conditioning and car suspension system. It is mainly used to reduce vibration and noise when driving, improve the stability, s...view
September 3, 2018China's economy is still developing rapidly. As the contradiction between the resources and the environment is increasingly intensifying, according to the requirements of Scientific Outlook on Develop...view
September 3, 2018Check whether there is any big crack or fracture in the seal. If the seal is broken, it can be repaired with a binder. Using the special seal adhesive can patch up the big cracks easily. Of course, if...view
September 3, 2018There are many kinds of the rubber auto parts except the tires. Generally, one car is equipped with 200 to 300 kinds of rubber auto parts, and some wagons and industrial cars can have 400 to 600 piece...view
September 3, 2018Design specification for wall thickness of auto die casting partsDie casting parts with thin walls have higher strength and better compactness than the ones with thick walls. In view of this, the desi...view