Rubber Buffer is widely used in automobile engines and other mechanical equipment, which have shock absorber, effectively increase the service life of equipment, good sealing performance, wear-resisting and anti-aging properties.

Product Size： Customized according to customer needs
Product Material：(EPDM/NBR) can also be customized according to the specific use of the product.
Product Features： The quality environmental EPDM rubber material has the characteristics of anti-aging, anti-vibration and noise reduction, ozone resistance, high and low-temperature performance.

Suspension rubber buffer is a kind of rubber product with high elasticity and toughness. It is used to install the spiral spring in the vehicle suspension system, which mainly ACTS as a cushion shock absorber and protects the shock absorber.

Small Rubber Buffers Function Introduction:
1. Comprehensively improve the ride comfort, enhance driving comfort, and enjoy driving pleasure.
2. Can limit the vibration of the body and absorb the noise of the suspension system.
3. Solve the problem of spring weakness, improve the body of 0.2-0.3 cm, but cannot effectively improve the carrying capacity.
4. Limited buffering and absorbing the instantaneous pressure caused by rough road surface to avoid damage to the shock absorption system (warning: exceeding the limit will damage the shock absorption system).

It is already a weak spring, when a compressed body will fall too low, so by installing the rubber buffer to spring support and relieve stress, and this kind of situation can be understood as to improve the car. It is usually 0.2-0.3 centimeters or more, depending on the spacing of the springs and how weak the spring is.

But if it is a new spring, under normal circumstances, it does not also need to increase the body height, unless the installed buffer rubber specification is greater than the spring spacing, appear a certain section of the rubber spring buffered jacking force, this is not correct. So make sure you choose the buffer size that matches the spring spacing.

Contact the Relong rubber buffer manufacturer for more detailed information.

Each link has been rigorously tested to focus on the top 10 problems that customers care about.

1. Sealing

2. Waterproof

3. Oil Resistant

4. Resistance To Aging

5. Anti-High And Low Temperature

6. White

7. Damaged

8. Roak

9. Wear-Resisting

10. Environmental Protection

Company Advantage

● 28 Years of Research And Accumulation.

Master the core technology of mold

Using precision mold processing equipment, excellent mold development, and design team, using the most reasonable mould structure design, edge method is more simple and quick, high production efficiency, No residue on the edge, and meet customer requirements for size.

● Precision Management

Traceability can be traced all the way.

Strictly follow the standard procedure of ISO/TS 16949:2009 quality management system and strictly control every step of QC engineering drawing.

● Efficient Service

Build a good reputation in the industry.

Provide a professional testing report.

The delivery rate is 100%.

Provide a free test report.

Production Process

1. Customer Requirement (1)material (2) precision

2. Project Communication (1) feasibility (2)quote

3. Material Development (1) proofing (2) detection

4. Mould Development (1) die sinking (2)proofing

5. Sample Approval (1)report (2)sample

6. Make to Order (1) place an order (2) delivery