How To Solve The Eccentric Wear Phenomenon Of The Rubber Seal?
2020.03.30
When the seal is affected by eccentric load, large wear occurs at the location where the load gathers, while the rest parts have little or no wear. Wear that does not occur on the entire circle of the lip is called eccentric wear. Why does rubber seal wear off? What's the reason? As follows:
1. The sealing ring is bearing the eccentric load;
2. The seal groove machining deviates from the center;
3. The seal clearance is too large, resulting in uneven compression allowance.
4. The assembly of hydraulic cylinder is not perfect.
"Wear adjustment ring can be used to solve the problem of eccentric wear."
Secondly, in the use of the dynamic seal, leak of a certain amount is allowed. Generally, when the equipment is running hot, the lubrication of the sealing surface is improved, and the wear of the secondary friction is reduced. The dynamic balance between wear and seal determines the service life of mechanical seal equipment and system. It is obvious that all the problems in the rubber seal ring wear, eccentric wear, and seal are related to the state of the solid's surface and the relative movement of the seal friction, and keep the lubrication state of the friction condition and the auxiliary seal.
September 3, 2018The rapid development of China's automotive industry is promoting the related supporting industries, especially the rubber industry. Over the years, automotive rubber parts have developed into a uniqu...
view
September 3, 2018Anti-vibration productIt is mainly installed in the engine, car body, air conditioning and car suspension system. It is mainly used to reduce vibration and noise when driving, improve the stability, s...view
September 3, 2018China's economy is still developing rapidly. As the contradiction between the resources and the environment is increasingly intensifying, according to the requirements of Scientific Outlook on Develop...view
September 3, 2018Check whether there is any big crack or fracture in the seal. If the seal is broken, it can be repaired with a binder. Using the special seal adhesive can patch up the big cracks easily. Of course, if...view
September 3, 2018There are many kinds of the rubber auto parts except the tires. Generally, one car is equipped with 200 to 300 kinds of rubber auto parts, and some wagons and industrial cars can have 400 to 600 piece...view
September 3, 2018Design specification for wall thickness of auto die casting partsDie casting parts with thin walls have higher strength and better compactness than the ones with thick walls. In view of this, the desi...view